€178
€300
REVEAL COUPON
€178 with coupon for Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer – BLACK EU PLUG from EU warehouse GearBest
220 x 220 x 250mm Build Volume Filament Run-out Detection Power Outage Resume Function
Alfawise U30 2.8 inch Touch Screen DIY Desktop 3D Printer - BLACK
free shipping worldwide
€178 €300
Description:
Alfawise U30 is an incredible 3D printer designed for professionals and amateurs alike. It trains hands-on ability, and only 1 hour is required to finish the assembly. It boasts high cost-performance ratio – any DIY enthusiast will not be unable to resist. U30 has a large build volume – 220 x 220 x 250mm for most challenges. More importantly, printing with Alfawise U30 is hassle-free because the two resume functions prevent any imperfection and failure due to power outage and filament run-out. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!Main Features:
●220 x 220 x 250mm maximum build volume to print exciting models
●Precision printing with standard 0.4mm diameter nozzle, accurate alignment, and up to 120mm/s speed
● More successful in 3D printing with filament run-out protectionandpower outage protection
●2.8” full color touchscreen for more intuitive control
●Great DIY project for any beginners to train hands-on ability, only 1 hour needed
●Reinforced aluminum alloy construction, durable, in classical black and red colors
●Powerful heat bed using safety voltage for fast heating. With heat-resistant heat bed sticker, easier to use and clean
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, PVA, PP, TPU, wood filled, etc.Tip: the power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.Reminder:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
Alfawise U30 is an incredible 3D printer designed for professionals and amateurs alike. It trains hands-on ability, and only 1 hour is required to finish the assembly. It boasts high cost-performance ratio – any DIY enthusiast will not be unable to resist. U30 has a large build volume – 220 x 220 x 250mm for most challenges. More importantly, printing with Alfawise U30 is hassle-free because the two resume functions prevent any imperfection and failure due to power outage and filament run-out. Control the process and set parameters on the touchscreen. Enjoy easier and more successful 3D printing!Main Features:
●220 x 220 x 250mm maximum build volume to print exciting models
●Precision printing with standard 0.4mm diameter nozzle, accurate alignment, and up to 120mm/s speed
● More successful in 3D printing with filament run-out protectionandpower outage protection
●2.8” full color touchscreen for more intuitive control
●Great DIY project for any beginners to train hands-on ability, only 1 hour needed
●Reinforced aluminum alloy construction, durable, in classical black and red colors
●Powerful heat bed using safety voltage for fast heating. With heat-resistant heat bed sticker, easier to use and clean
● 100 Deg.C max. heat bed temperature, 250 Deg.C max. nozzle temperature for various filaments, such as PLA, ABS, PVA, PP, TPU, wood filled, etc.Tip: the power outage recovery functions well when you print more than 0.5mm in height. If the height is less than 0.5mm, it is recommended to print again.Reminder:
● Please read and follow the user manual carefully before you assemble or operate the 3D printer.
● Always use the correct AC voltage for your region.
● Please do not place the 3D printer near flammable / combustible materials, or any heat sources.
● Use the 3D printer only in properly ventilated areas. Maintain a safe distance from the printer.
Specification
| General | Brand: Alfawise Type: DIY Model: U30 Engraving Area: 220 x 220 x 250mm Frame material: Aluminum Alloy Nozzle quantity: Single Nozzle diameter: 0.4mm Nozzle temperature: Room temperature to 250 degree Layer thickness: 0.1-0.4mm Memory card offline print: TF card LCD Screen: Yes Print speed: 120mm/s (max.), 30 – 70mm/s ( recommended ) Platform temperature: Room temperature to 100 degree Supporting material: ABS,PLA,PP,PVA,TPU,Wood Filled Material diameter: 1.75mm File format: G-code,OBJ,STL XY-axis positioning accuracy: 0.0125mm Z-axis positioning accuracy: 0.0025mm Voltage: 24V Host computer software: Cura,Repetier-Host,Simplify3D Packing Type: unassembled packing System support: Windows / Mac / Linux Connector Type: TF card,USB |
|---|---|
| Dimensions and Weight | Product weight: 7.8000 kg Package weight: 8.6000 kg Product size: 42.50 x 40.20 x 50.50 cm / 16.73 x 15.83 x 19.88 inches Package size: 46.70 x 41.20 x 18.70 cm / 18.39 x 16.22 x 7.36 inches |
| Packing Contents | Packing Contents: 1 x 3D Printer Kit ( Semi-assembled ), 1 x English Manual |
