€269 with coupon for ACMER P1 10W Laser Engraver Cutter from EU warehouse GEEKBUYING

ACMER P1 10W Laser Engraver Cutter, 0.06×0.08mm Spot, 10000mm/min Engraving Speed, Offline Engraving, 32-bit Motherboard, 400x410mm

10W Laser Engraving
ACMER-P1 10W Laser Engraver obtains 0.06×0.08mm spot as S9 through laser beam shaping technology, which means that the P1 has higher energy density, stronger cutting penetration, and engraving capabilities. 

Advanced Air-assist for Faster and Cleaner Cutting
P1 advanced air-assist and high-power laser can accelerate material burning and residue removal, greatly improve cutting performance, and make laser cutting faster and cleaner.

Solid Architecture, 400x410mm Working Area
P1 engraver architecture adopts the 2040 profile, which is solid and the operation is smooth; the premium track with a powerful motor is more fluent in engraving and carving the item. 400x410mm large working area to meet various engraving needs.

Stronger Cutting Penetration
P1 high-speed air assist and high energy density lasers both increase the cutting penetration. Available to cut more materials, and also easier to deal with high-density woods such as MDF and Walnut, which are difficult for ordinary lasers.

Offline Engraving & Safe Protection Design
Built-in ESP-32-DOWD-VS chip and a 32-bit LX6 microprocessor, the machine supports operation via WiFi, TF card, and USB connection. P1 is equipped with an emergency stop switch and anti-tilt protection device, which can stop work urgently if any abnormality is found in the carving.

Wide Compatibility
This machine works well with LightBurn and LaserGRBL, supports Windows, MacOS, iOS, and Android system, and engraving file supports SVG, NC, BMP, JPG, PNG, etc.