BESTEK MRJ-8002 8-Outlet Review: Take your office… everywhere

If you’re into tech-devices, smartphones and anything related to it, there are a set of things that you can’t live without. Cables, Chargers, Cases are commonly listed by most tech-lovers, however, there is something that particularly gives life to our world of dreams – The Power Strips.

While some of us, are from a past when Power Strips were only used to connect devices to an electric current, nowadays they offer a plenty of additional features that expand the usability while also facilitate the life of many users in different environments. BESTEK is one among the companies that are really concerned about delivering products that offer usability, practicality, and portability. Based on this, today we’re going to take a deep look in one of its most recent products – The BESTEK MRJ8002.

UNBOXING:

The MRJ-8002 came in a simple plain box, no fancy design, and no gimmicks. At first sight, it looks pretty simple, but let’s have in mind that it’s the content what matters. Once again, we can’t judge a book by its cover, and the content does not disappoint.

PACKAGE CONTENT:

• BESTEK MRJ-8002
• USER MANUAL

Like previously mentioned the package is just a plain card box hiding the user’s manual and the Power Strip.

Get the BESTEK-MRJ8002

BESTEK MRJ-8002:

Moving directly to the Power Strip the MRJ-8002 brings a design that is rather different from the standard power strips. Instead of being a simple rectangle with plug holes, it brings a more modern design that stands in an office and fits neatly on top of a table.

The BESTEK MRJ-8082 has 8 numbered outlets in total, 4 in the left side and 4 on the right side. The front of the Power Strip is made of a plain black glass finish that goes from the bottom covering the entire top of the device. On the top, we can find 4 USB 3.0 Ports that are protected by small silicone caps that can be easily removed. On the bottom, we have the rotating stand that can be adjusted in order to get the Power Strip fixed over a surface.

The 8 sockets support AC Input: 100-125V and comes in the US standard of Plugs. So if you have a ton of devices with EU Plugs, be careful before ordering the BESTEK MRJ-8002. Otherwise, grab some adapters and let the fun begin.

The Top USB Port combo is made of three ports with 5V/7.5A Auto 0~2.4A and a single port that brings Qualcomm QuickCharge 2.0 Support V/2.4A, 9V/1.6A, 12V/1.1A. During my tests this latter port managed to deliver the expected results, making my Redmi Note 5 Pro charge from 59% to 90% in less than 40min. These results can vary from user to user and may depend on what you’re running in your phone while it is charging.

After inserting the Redmi Note 5 Pro in the QC2.0 port I was a bit disappointed and concerned to see only a 950mA max rate on the Ampere application. However, it took only a few seconds for the Qualcomm QuickCharge 2.0 to take action by doubling the charging rate.

The other USB ports are just standard 3.0 ports, so don’t expect more than 2.5A of charging rate on it. However, the combo of USB ports is perfect for placing other devices and also they’ll greatly expand the capabilities of your office.

There’s a neat and interesting thing in the BESTEK MRJ-8002. After putting it in the wall socket and pressing the Power button in the rear, the product logo lights up, as well as small indicators of each USB port with their respective capabilities.

Talking about the Power Button, it is located at the rear of the MRJ-8080 just above the long 1.8m AC cord. This long cable is strong and reinforced, once again showing the great quality of this BESTEK product.

BESTEK MRJ-8002 for $35.99 Deal

BESTEK MRJ-8002 OVERALL SPECS:

CONCLUSION:

Let’s block ads! (Why?)