€120 with coupon for ELEGOO® MercuryX Bundle Washing and Curing Machine with Transparent Yellow Shade/8000ML Large-capacity Design/360 ° Three-Dimensional Curing from EU CZ warehouse BANGGOOD

ELEGOO® MercuryX Bundle Washing and Curing Machine

Warm Tips:

• Products will no longer be sent with SD cards and USB and TF cards.
• MercuryX will be restock CN warehose in mid-February.

Download File to know more:

• Manual Download

Manual MercuryX: Click to download
Click to watch: How to avoid bleeps on the Washing machine?

Features:

• 【Transparent Yellow Shade】Effective blocking 99.9% UV light. The maximum size of the supporting printer is 9.1 inches
• 【Faye Mirror Design】The entire effective curing area, light power distribution more uniform.
• 【360 ° Three-Dimensional Curing】Curing platform can be 360 ° automatic rotation, curing size φ200 * 260mm.
• 【Bottom Light Source Design】The bottom to increase the light source design, the base can also be cured, do not let go of every detail, fully curing the model.
• 【Sealed Water Tank & Large-Capacity Design】8000ML large-capacity design, using rubber sealing strips, safe and reliable.
• 【Operation Knob】Long press 3 seconds to turn on the machine, integrated operation panel plus light with, simple operation.
• 【Super Long Time Setting】Maximum adjustment of 30 minutes.
• 【Dual Connector Power Adapter】To meet the needs of CURE and WASH work at the same time.
• 【Curing Mode and Cleaning Mode Completely Separate】MercuryX WASH and MercuryX CURE can work at the same time, one for cleaning work and one for curing work.

Specifications:

• ELEGOO MercuryX WASH Machine
• Control Method: Knob + Button
• Rated Power: 12W
• Input Voltage: 110V/240V 50/60Hz
• Time Setting: 0-30mins
• Machine Size: 255mm*155mm*385.5mm
• Maximum Wash Volume:
• 180mm*121mm*153mm (with platform)
• 201mm*124mm*255mm (without platform)
• Machine Net Weight: 2.27kg
• ELEGOO MercuryX CURE Machine
• Control Method: Knob + Button
• Rated Power: 36W
• Input Voltage: 110V/240V 50/60Hz
• Time Setting: 0-30mins
• Machine Size: 246mm*230mm*363.5mm
• Maximum Curing Size: φ200mm*260mm
• Machine Net Weight: 2.4kg

Package Included:

1 x MercuryX Bundle Washing and Curing MachineOperation Instructions:

• After the model is printed, please clean and blow-dry the model before putting it into the machine.
• If the model become yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.
• Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.
• Please do not use it for more than 40 minutes at a time to avoid overheating
• Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.
• Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.