€171
€299
REVEAL COUPON
€171 with coupon for SPCMaker Bat78HD-S 78mm F4 AIO 20A ESC 2S Whoop FPV Racing Drone RTF w/ 25/400mW VTX RunCam Split 3 Nano Camera Radiolink T8S Radio Transmitter from BANGGOOD
SPCMaker Bat78HD-S FPV Racing Drone
Specification:
Brand Name: SPCMaker
Model: Bat78HD-S
Item Name: 78mm F4 AIO 20A ESC 2S Whoop FPV Racing Drone
Version: RTF
Product Size: 107x95x35mm
Weight: 59g (without battery)
Packing: portable storage handbag
Packing size: 215x220x125mm
| F4 OSD Flight Controller AIO 20A ESC Board | CPU: STM32F411CEU6 (100MHZ)IMU: MPU6000 (SPI)OSD: AT7456ELED: Support WS2812 and other programmableSensor: Built-in current sensor (current coefficient Amp Meter Scale: 300)Firmware: Betaflight 4.1.2Flight control model: MTKS/MATEKF411 (STM32F411)Receiver support: Frsky/Futaba/Flysky/TBS Crossfire/DSMX|DSM2 receiverSize: 31.4×31.4mm (25.5mm mounting hole)Weight: 6.83g |
| Onboard 20A BLHeli_S 4in1 ESC | Firmware support: BLHELI_S/JESCProtocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600Input voltage: 2S-4S LipoContinuous current: 20APeak current: 40AFirmware version: BLHELI_S (Q_H_20)Motor connector: 1.25mm 3P straight pin socket |
| 1103 11000KV Brushless Motor | Model: 1103 11000KVHeight: 8.5mmShaft: φ1.5mmMotor mounting hole: hole pitch 9mm screw hole M2KV: 11000KVInput Voltage: 2-3S lithium batteryCable length: 40mmWeight: 3.3g |
| Gemfan 1636 40mm 4-Blade Propeller | Brand: GemfanName: 1636 40mm 1.5mm propellerNumber of blades: 4 bladesPitch: 3.5 inchesMaterial: PCWeight: 0.61gInner diameter of center hole: 1.5mmPaddle diameter: 40.8mmCenter thickness: 5.2mmMaximum width: 7.46 mm |
| 5.8G 40CH 25-400mW VTX | Brand: SPCMAKERModel: NANO VTX V1.0Video format: NTSC / PALPower: 25/100/200/400mWControl mode: Betaflight OSD control (RX)/buttonInput voltage: 5VSize: 14 x15mmPitch: 18 mmAntenna: IPEXWeight: 2g |
| RunCam Split 3 Nano FPV Camera | Brand Name: RuncamItem Name: Split 3 Nano whoopField of View(FOV) : Recording FOV: 165°; FPV FOV: 165°@16:9, 130°@4:3Video Resolution: 1080@60fps / 1080@50fps / 1080@30fps / 720@60fpsTV Mode: NTSC (720*480) / PAL (720*576) SwitchableInterface: JST 1.25mm / UARTMax Micro SD Card Supported: 64G(need Class 6 or above, recommend Class 10 / UHS-I / UHS-II / UHS-III)Hole Distance of Installation: 25.5*25.5mmDimensions: PCB 29*29mm / Lens Module 14*14mmPower Input: DC 5-20V(Non-direct power supply from battery. Powered direcly with battery will generate surges and burn the camera.)Working Current: 650mA @5V / 270mA @12VWeight: 10.5g |
| Radio Tranmitter & Receiver | Brand Name: RadioLinkProduct name: T8S transmitter with R8SM receiverWeight: 142gColour: BlackSize: 162.5x 95.5×57 mm (transmitter)Working voltage: 4.2VWorking current: <150 (±5) mASupport R8EF, R8FM, R7FG, R7F, R6FG, R6F receiverProduct name: R8SM receiverModel: R8SMSize: 18 * 13 MMWeight: 2gNumber of channels: 8 channelsSignal output: SBUS / PPMWorking voltage: 4.8-6VWorking current: 30mA (input voltage: 5V)Compatible T8S / T8FB / RC6GS / RC4GS receiver |
| 2S 7.6V 450mAh 80C Lipo Battery | Model: High Energy 7.6V 450Mah 80CCapacity: 450mAhQuantity: 2 PCSSize: 14x18x 62mmPlug: XT30 plugContinuous discharge rate: 80CWeight: about 28g |
| Hawkeye Display Screen | Model: Hawkeye 3.5-inch xitu versionDisplay resolution: 960x240Backlight: LEDSize: 3.5 inchesBrightness: 350LuxAspect ratio: 16:9Response time: <10msColor system: PAL / NTSCBattery life: about 2.5 hoursSignal: Video (PAL/NTSC/Auto)Display size: 66×57×14mmGross weight: 110g5.8G sensitivity: -94dB |
| SKYRC E3AC Charger | Model: SKYRC E3AC chargerAC input: 100-240VC, 50-60HzBattery type: LiPoNumber of batteries: 2-3SCharging current: 1.2A maximumBattery termination voltage: 4.2V±0.02VCircuit power: 11W±10%Size: 88x57x35mmWeight: 103g |
Pacakge Included:
1x Bat78 HD Whoop Drone
8x GEMFAN 1636 40MM 4CW+4CCW propeller
1x T8S+R8SM remote control
1x Hawkeye 3.5-inch xitu version
1x E3AC (2-3S) charger
2x 2S 450mAh 80C lithium battery
1x USB tuning parameter connection data cable
1x Storage handbag
