€197
€299
REVEAL COUPON
€197 with coupon for BetaFPV Beta85X Whoop HD Digital Version 3S 85mm RC Drone FPV Racing Caddx Nebula Nano Beta F4 2-4S AIO – Frsky FCC from EU ES warehouse BANGGOOD
BetaFPV Beta85X Whoop HD Digital Version 3S 85mm RC Drone
BetaFPV Beta85X Whoop HD Digital Version 3S 85mm RC Drone
shipping worldwide
€197 €299
It only weights 66.6g! Beta85X HD Digital VTX perfectly meets the optimal ratio between weight and power.
With the special modified Nebula Nano Kit, the total weight of the drone is significantly reduced and flight
experience improved a lot. Pilots can easily achieve almost all kinds of FPV freestyle tricks with HD footage.
If you want to enjoy a brand-new flying experience with HD digital VTX whoop, this Beta85X HD digital VTX
ultralight 3S drone will be your best choice.
Description:
Beta85X HD | |
Weight | 66.6g(w/o Battery) |
Beta85X Frame | Wheelbase: 85mmMaterial: Clear plasticMotor mounting hole: for 110x motors ( such as 1105 6000KV motors )FC mounting hole: fully compatible with whoop style FC board mounting pattern, 26mm x 26mmLED Holder AvailableWeight: 10g |
Beta F4 2-4S AIO | F4 AIO Weight: 5.07g FC: CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU6000 (SPI connection)Size: 26mm x 26mm, whoop mounting pattern Firmware version: BETAFPVF411 (BEFH) OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and BETAFPV Micro DSMX Receiver (Don’t support DSMX RX with 3.3V solder pad ) since V1.2. Support programmable LED like WS2812 etc Built-in current sensor ESC:Support BLheli/BLHELI_S suite Pass-through ready Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input voltage: 2S-4S Lipo Continue current: 12A Peak current: 13A Firmware: BLHELI_S Processor: SILABS EFM8BB21F16G Motor Connectors: 1.25mm header pins connector Factory firmware: G-H-30-16.7 |
Beta 1103 Motor | Height: 14mm Shaft: φ1.5mm Motor Mount Holes: M1.6 on Dia 8.5mm KV (rpm/V): 8000 Plug: Micro JST-1.25 3-pins connector |
Gemfan 2020 4-Blade Propellers 1.5mm Shaft | Weight: 0.93g Blades: 4 Material: PC Prop Disk Diameter: 50.3mm Center Thickness: 4.5mm Shaft Hole: 1.5mm |
Receiver Option | Frsky XM+ / TBS Crossfire |
Camera& VTX | Camera Degree: 25°-45° HD digital camera & VTX: Modified Caddx Nebula Nano Kit Equipped with a modified Nebula Nano HD Kit, it further loses the weight of the drone, which only weighs 14.2g, brings the Digital FPV more possibility to achieve different kin-ds of freestyle tricks. This kit also can support with DJI goggles. With DJI goggles, it canprovide 720p/60fps digital high-definition picture and a transmission range up to 4km.Users can choose 25mW/200mW/500mW/700mW from DJI goggle settings. |
Air 5.8GHz Antenna (LHCP) | Connector: IPEX Polarizability: LHCP Gain: 2.2Dbi Color: Blue Weight: 1.1g (1 pc) Dimensions: 10.3mm*50mm Center Frequency: 5.8GHz Bandwidth: 500 MHz (5.5 – 6.0GHz) Cable:RG1.37 |
Recommend 3S 450mAh battery (Not including) | Capacity: 450mAh Voltage: 11.1V Discharge Rate: 75C Max Burst Discharge Rate:150C Connector: XT30 Size: 61*15*18mm Flighttime: 4 min 30 sec on Beta85X (smooth flight in a windless environment) Weight: 44g |
Package Included:
1 x Beta85X Whoop Quadcopter (HD Digital VTX)
1 x Gemfan 2020 4-blades Propellers (2CW+2CCW)