€59 with coupon for 110-240V Indoor Intelligent Hydroponic Planting Box Soilless Cultivation Equipment LED Fill Light Vegetable Planting Machine Nursery Flower Pot – Hydroponics from BANGGOOD
Indoor Intelligent Hydroponic Planting Box
Usage Instruction :
Planting methods for vegetables and fruits:
1. Soak the seeds with water, soak the seeds for different times, and soak the plants for different times.
2. Put the sponge soil into the planting basket and soak it in water.
3. Mix the planting liquid, add water to the 4L mark line of the planter water tank, pour the nutrient solution, and measure the EC value to be equal to 1100.
4. After the seeds are fully soaked, place the seeds in the center of the sponge soil that has been soaked, and then put them back into the hole of the planting box.
5. Wait for the seed to grow two leaves, then turn on the fill light and turn the light board to the lowest position.
6. Wait for the seedlings to grow up, about 20 days to change the water. Unplug the silicone plug behind the planter to make the water leak clean. Add water again to the mark line 4L, then slowly add the nutrient solution and measure the EC value to be equal to 1500.
7, Pay attention to observe the water level, about once a week, add an EC value of about 1500-1800 aqueous solution, and keep the water level on the 4L mark.
Planting methods for flower plants :
1. If it is planted from the seed, the steps are the same as the vegetable planting, but the EC value of the solution is reduced to about 800 in the middle and late stages.
2, if it is transplanted, the water tank is added to the 4L scale, and the EC value of the solution can be adjusted to 500-800.
3, pay attention to the water level, when the water level is lower than 2L, add the prepared aqueous solution.
Package Included ：
1 x Smart Flower Pot
1 x Aluminum Telescopic Pole
12 x Planting Blues(Soil Culture Device Not Included)
12 x Nursery Blocks(Soil Culture Device Not Included)
1 x Power Adapter
